Easy to Use, Broadcast Quality, Very Low Latency, 1 RU, Standards Compliant, Full 1080i or 1080p, 720p, 1.5 to 100 Mbps, Standard and High Definition MPEG-2 4:2:2 and 4:2:0 Transport Stream Encoder with SD-SDI, HD-SDI Input and Auto Detection. Optional HDMI Input. Simultaneous DVB ASI and IP Out. Full Control via Front Panel LCD and Push Buttons or via a "Browser". Perfect for Broadcast, HD Military Surveillance, HD Sports Origination, HD Movie Previews, ENG Helicopters, HD Video Conferencing, and Other HD Content Creation Purposes Where Low Latency and High Definition is Desired. Full Support for G708 CC and Dolby Digital® AC-3 Pass Through Audio.
Broadcast Quality, Full Featured, Industry Compliant, Remotely Manageable, 1 RU, Standard and High Definition Fujitsu® Chip Based H.264 AVC Part 10 Encoder with HDMI, Component, SDI, HD-SDI, and CVBS Inputs and Both ASI and IP Outputs. Audio Support Includes Analog in, or Embedded Audio. Audio Output is AAC, MPEG-1 Layer II, or Dolby Digital® AC-3 Passthrough. Tested to Work with Most Decoders and with Wowza™ and Adobe® Flash® Servers. Features Pro-MPEG FEC. Features VBR or CBR (Constant Bit Rate) Output. CBR setup enables great IP video delivery with our Virenza/S™ IP H.264 Decoder.
Four Channel, Broadcast Quality, Full Featured, Fujitsu® Chip Based, Industry Compliant, Remotely Manageable, 1 RU, Standard and High Definition H.264 AVC Part 10 Encoder with HDMI, Component, SDI, HD-SDI, and CVBS Inputs and Both ASI and IP Outputs. Audio Support Includes Analog in, or Embedded Audio. Audio Output is AAC, MPEG-1 Layer II, or Dolby Digital® AC-3 Passthrough. Tested to Work with Most Decoders and with Wowza™ and Adobe® Flash® Servers. Features Pro-MPEG FEC. Features VBR or CBR (Constant Bit Rate) Output. CBR setup enables great IP video delivery with our Virenza/S™ IP H.264 Decoder. Unit has been Tested to work with Harmonic, Tandberg, Cisco, and Sencore Decoders.
IN:
SDI, HDSDI, HDMI
OUT:
MPTS via DVB ASI and IP
Overview
The NCoder HD II was designed to meet the unmet needs of Military, Government, Sports Broadcast, HD videoconferencing, UAV, and News Gathering organizations who need HD at Very Low Latency. The best HD encoders on the market today can only deliver HD with approximately 500 ms Delay. We offer 30 milliseconds delay. We offer just about everything our competitors do except we do it at lower latency. In order to attain this latency we only encode the input with I and P frames. As we all know encoding B frames increases latency substantially. We differ from others in that we output DVB ASI and/or IP...
A recent customer is using this encoder along with well-positioned
HD cameras in a Major League sports arena along with our ATSC modulator
in their sky boxes. We are also in discussions with major corporations
to use the HD encoder to re-encode YPrPb originated content. Of
course there are many military applications. HD just provides more
data in remote monitoring applications.
Interestingly we have just created and now declare compatibility with the Amino IP set top box. www.aminocom.com This means you can distribute HD over IP to a multitude of inexpensive consumer priced decoders linked to inexpensive HD televisions or monitors.
We also have recently tested the NCoder HD to be compatible with
our own 8VSB and Blonder Tongue QAM modulators. This gives you assurance
of operation in a CCTV environment.
Standard Features:
MPEG-2 4:2:2 or 4:2:0 video compression: 1.5 to 100 Mbps
Input: SD-SDI, HD-SDI
Optional HDMI input
Output: Simultaneous DVB-ASI and IP (UDP or TCP), in one system
Low Latency – 30 milliseconds
Compatible with both PAL and NTSC
MPEG-1 Layer-II audio encoding, Dolby Digital® AC-3 pass through
Accepts 1080i, 1080p, 720p, and 480i
World’s first 1080p/60 real time MPEG-2 encoder – encodes 1920 x 1080 @ 59.94 fps
Closed captioning pass through
Supports IP Unicast or Multicast
Stereo audio bit rates to 384 Kbps
Audio sampling rates: 32K, 44.1K, and 48K samp/sec
LCD front panel control
Web-based management
Fully compliant with the latest DVB standards
Boots up in 30 seconds
Optional two channel mode
Targeted Applications:
Broadcasting at Live Sports Venues
Military and law enforcement video surveillance
Medical
Electronic News Gathering (ENG)
HD Video Conferencing
Companion Products to Ask about:
1.Y Pr Pb to HD SDI Converter – HD 10 AD
2. MVC101 Hardware Decoder for Previews
3. MPEG-2 frame accurate clips editor – Software
4. AJA 4 Channel Audio to HD SDI Embedder
Cost-Effective, Real Time, Remotely Manageable, Auto Detection of SD or HD, H.264/AVC Encoder. Supports Composite or Component Input Only and IP Output. Audio Support for AAC. Encodes at 1 to 12 Mbps. Ideal Encoder for Re-encoding YPrPb, DVI, or CVBS Analog Feeds. Perfect for Private IP Networks in Hotels, Bars, Etc. from Devices that Output Composite or Component Video and are Targeted at IP STB's via Multicast. Tested to Work with Wowza® and Adobe® Flash® Encoder Software.
The MAKITO is ideally suited for today's challenges and for those that can be foreseen well into the future. The MAKITO is based on the highly efficient H.264 compression standard saving over 50% of the bandwidth and disk space required by video-over-IP deployments. In addition, the MAKITO is equally proficient at standard definition (composite and s-video) as it is at all high definition resolutions and frame rates up to 1080p60. To accomplish this in a small form factor the MAKITO auto-detects the input of its single BNC connector and supports composite, SDI, HD-SDI, and 3G-SDI (the new standard for 1080p60). Today, the MAKITO can comfortably address video-over-IP encoding anywhere on a resolution / bandwidth scale from CIF at less than 256 kbps to Full HD at 15 Mbps.
Real Time VGA Plus Audio to IP Converter with 720p MPEG-2 Encoder (1280 x 720 Input). Designed for Real Time MPEG-2 Encoding of any VGA or DVI Screen and Sending it Out as an IP Unicast or Multicast Stream. Output Resolution is 720p at 16x9. Designed to Present Information to Many Viewers from a Computer via IP Set-Top Boxes! Ideal product to present Bus Station Schedules, Class Schedules, or any other information that originates in a computer. Supports MPEG-1 layer 2 audio in via "dual" Mini DIN connector.
This system consists of 1 item that does 4 things:
1. Scan convert
2. MPEG-2 encode
3. Aspect ratio convert
4. Encapsulate TS into IP
Some Supported Info Servers:
1. SCALA
2. Inscriber (Harris-Info Cast)
Standard
Features:
Input: YPbPr, DVI, or CVBS
Output: transport stream over IP (UDP)
Compliant with H.264/MPEG-4 AVC standard
AAC audio encoding or Dolby Digital® AC-3 passthrough
Encoding bit rates: 1 Mbps to 12 Mbps
Configure and operate via web-based remote management
Constant Bit Rate (CBR)
Supports unicast or multicast
Tested to work with STB’s (set-top boxes)
Tested to work with Wowza® and Adobe® Flash® Encoder software
1 RU with mounting holes
Applications:
Encoding analog video for transmission over IP
IPTV unicasting or multicasting
Hotels, Restaurants, Resorts
Streaming to designated VideoLAN VLC, Mplayer, or Windows Media Player clients, or to Amino™ or other set-top boxes
Reduce MPEG-2 distribution bitrate by up to 60% with no change in picture quality
Standard
Features:
Industry Standard H.264 encoding in one 1 RU enclosure
HD-SDI input
IP (RTP and UDP) out
Superior image quality and low delay (less than 80 milliseconds)
Short boot time
Video compatible for various formats such as 1080p, 1080i, 720p, 480i and 576i.
Full control via SNMP
Targeted Applications:
Stadiums and live events
IPTV DISTRIBUTION delivering HD channels to viewers in hospitality, financial institutions, stadiums, and within government organizations
Hospitals and medical facilities
Military
HD video conferencing
Standard Features:
VGA:
Input: VGA 1280 x720 Full Screen or 1280x 1024 with shrunken
viewport
Also works with DVI-I
MPEG Encoding Rates supported: 20 to 35 Mbps
Based on Windows®, embedded
IP:
Encapsulates transport streams into IP
Unicast or multicast streams
Able to be mixed with analog channels with passive mixing
via inexpensive RF mixer
Applications:
Computer-based presentations over HD television monitors
for:
Professional Grade, Rackmounted, Single or Multichannel, Standard Definition, Linux® Based Analog Video to MPEG-2 Transport Stream Encoder that Integrates Inexpensive PC Bus Based Standard Definition MPEG-2 Encoders and Routes Selected Transport Streams to Any MAC Address via IP – UDP, RTP, RTSP, RTMP, Adaptive, HTTP, HTTP Live, or FTP. Encoder supports 480i and 480p with MPEG-1 layer II audio. Can Work as a Low Cost “Catcher” in Small VOD Implementations. Typically the desired streams are streamed in real time using UDP or RTP via IP multicast or unicast streams to IP set top boxes (STB's) such as Amino, or designated VLC or MPlayer equipped PC clients for viewing. This content server architecture assumes you have proper IP provisioning and this type of system is typically deployed in "closed" systems where bandwidth is dedicated. It is not guaranteed to work over the public internet. Performance depends on available bandwidth.
Professional, NTT® Encoder Chip Based, Multi-Channel, MPEG-2 Video Encoder and TS Multiplexer with ASI Output and HD-SDI, SD-SDI, and Analog (Composite) Input. Supports Dolby® PC-3 and EIA-608 and EIA-708 closed captioning. Encodes and Multiplexes Single HD-SDI Input with up to Two SD-SDI or NTSC Inputs, or Four Standard Definition or Analog Channels for Primary and Virtual Channel Creation. Outputs Stable 19.3 Mbps via ASI or SMPTE 310M with Option.
Standard
Features:
Encapsulates transport streams into IP packets
Simultaneously receives analog inputs from one to eight video and audio inputs
Uses multiple dual channel hardware based MPEG-2 encoders that support 480i and 480p video and MPEG-1 layer II audio
Input: Standard Def analog input via CVBS connectors
Supports HTTP live adaptive streaming protocol for output to mobile devices
Supports M3u8 playlist files (standalone and through HTTP live)
Capable of near real time FTP output of segmented TS streams with I-Frame boundaries
IP Output
IP output protocols: UDP, RTP, RTSP, HTTP, HTTP Live, HTTP Smooth, HTTP Dynamic, FTP, RTMP (Open Flash), WMV9 with HTTP/ASF
Supports MPEG-1 Layer II audio inputs and outputs
200 Mbps IP raw output capability
Transmits PAT, PMT, and PCR information
Receives and transmits at the same time
Remote configuration management via Web Browser and Secure Shell (SSH)
Option for store and forward
Optional support for encrypted streams (CAM modules)
Supports NTSC or PAL
Can be combined with HD RF 8VSB receiver cards to create hybrid analog/digital head end
Tested compatible with major brands of IP devices including Amino™, Roku®, Atlanta DTH, and Apple iPad® and iPhone®
Based on embedded Linux® (via flashdisk)
For similar system with transcoded H.264 output capability, see our MPEG Gearbox™
Applications:
IPTV Unicasting, Multicasting, Streaming
Rebroadcast Direct TV or Dish TV when combined with Component to Analog converter
Telco TV
ENG (Electronic News Gathering) – Stream content to and from remote locations
Streaming to designated VideoLAN VLC, Mplayer, or Windows Media Player clients
Internet transmission of movie or video “dailies”
Standard
Features:
Maximum 4 channel encoder and TS-Mux
Inputs:
HD-SDI: One HD-SDI input plus two additional video inputs (HD, SD or analog)
SD-SDI: Four digital SD-SDI inputs
Analog (Composite): Four analog (CVBS) NTSC inputs
Audio Inputs:
Analog: up to 4 stereo pair
Digital: Embedded Audio, AES/EBU
Output: DVB-ASI, SMPTE-310M or IP (100/1000 Base-T)
Multiple video format compatibility including 1080i, 720p and 480i
PID filtering
Generates static PSIP Tables and locates PIDs at desired locations