Broadcast Quality Frequency Agile High Definition 8/16 VSB Receiver Demodulator with MPEG-2 HD/SD Decoder (2.5-45 Mbps). Decodes DVB-ASI or SMPTE 310M and Demodulates 8VSB RF and Converts it to SDI, HD-SDI, RGB, YPrPb, or Composite Output. Transport Streams Play Out in HD or SD Format. Optional Secondary SD Decoder with Composite Output Only. Dolby AC-3 and MPEG Audio Decode with XLR Connectors. Cost Effective MPEG-2 Decoder/Receiver. Additional Features include SNMP Management.

Broadcast Quality, Standards Compliant, Frequency Agile 8VSB Receiver and MPEG-2 and 4 and H.264 HD Decoder With 8VSB, IP (with Pro-MPEG FEC), or ASI Input. Demodulates 8VSB Frequencies and Decodes Both H.264 and MPEG-2 Video Formats to SMPTE 259M (SD SDI), SMPTE 292 (HD-SDI), or YPrPb. Supports AES-3 id Audio as well as AC-3 Audio. Supplies Crystal Clear Digital or Analog Video with the 8VSB Format used by Broadcast Professionals in USA, Canada, Korea. Supports BISS and Other CA.

Standard Features:

• Input: 8/16 VSB, DVB-ASI, SMPTE 310M
• Automatic switchover from 8VSB to ASI in
• Output: ASI, SMPTE 310M, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL)
• Decodes and displays closed captioning (EIA 608 or EIA 708)
• Receives 8VSB signal via 75 ohm F-connector
• Choose digital stream from on-air terrestrial (8VSB) or DVB-ASI or SMPTE-310M signal
• MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
• Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
• RGB video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available
• 2 lines by 40 characters LCD display
• Down converts HD input to SD out
• Front panel controls for fast setup
• Firmware upgradeable via internet or USB
• SNMP (10/100 Base T Ethernet) management
• Easy-to-use Web-based GUI
• PSIP display – PAT, PMT, MGT, VCT, EIT, STT
• Optional second RF input port
  

Applications:

• Off air 8VSB receiver
• MPEG-2 HD or SD Decoder
• HD-SDI file playback
• Content repurposing

Standard Features:

• Input: 8VSB, IP, DVB-ASI
• Optional 2nd 8VSB RF input
• Supports Pro-MPEG FEC
• Includes CAM module and support for BISS
• Output:  HD-SDI, SDI, DVB-ASI, YPrPb, RGB, composite, MPEG or AC-3 audio
• Downconverts HDSDI to SD SDI if requested.
• Signal from 75 ohm BNC connector
• May Choose Digital Stream from 8VSB or DVB-ASI or SMPTE-310M or IP signal
• Selected digital stream is supplied in DVB-ASI and SMPTE-310M format signal
• H.264 (MPEG-4)/MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-259M or SMPTE-292M (SDI) with embedded 8 channel audio (SMPTE-299M)
• Dolby Digital AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on one XLR connector and one D-Sub 9P connector
• RGB video signal with 1080i/720p/576p/ 576i (480i) video mode
• 2 Lines by 40 characters LCD display
• PSIP/EIA-608, 708 closed caption compliant
• Down converts HD input to SD out
• 1 RU rack mountable frame
• Firmware upgradeable via Internet or USB
• USB 2.0 Support
• SNMP (10/100 Ethernet) management support

Applications:

• Off air terrestrial receiver
• MPEG-2/4/H.264 HD Decoder
• HD-SDI file playback
• Content repurposing

Standard Features:

• One to eight receiver modules fit snugly into 2 RU chassis
• Single demodulator ships with power supply and chassis
• Optional additional modules can be factory or field installed
• Tunes to RF center frequency with thumb wheel switch
• 8VSB, 16VSB, 64QAM, 256QAM support (ITU-T J.83 Annex B)
• Tunes frequencies from 55 to 860 MHz
  • VHF Channels 2-13
  • UHF Channels 14-69
  • Cable Channels 2-134
• Dual DVB-ASI outputs
• SMPTE-310M output mode available
• Output disable mode available on no lock
• Fault relay contact available
• Front panel controls with direct entry switches
• Front panel LED display with status and fault indicators
• Signal-to-noise ratio display in 3dB step LED bar display
• One to eight modules fit into 2 RU chassis that provides power

Applications:

• “Cherry picking” channel line ups for cable system operators
• QAM or 8VSB signal regeneration
• Schools and universities with cable systems
• Hotels and cruise ships
• “Content grooming” or “cherry picking” via a TS mux

Professional, Frequency Agile, 8 and 16 VSB HDTV Receiver/Demodulator and MPEG-2 High Definition Decoder (14-45 Mbps) with 8VSB RF, ATSC, SMPTE 310M, or DVB ASI TS Input and ASI, ATSC, SPI, SDI, HD SDI, Y/C, or Y Pr Pb Output. Dolby AC-3 and MPEG Audio Decode with XLR Connectors. Ideal Monitor for Commercial High Definition Broadcast Applications.

Standard Features:

• Receives 8/16 VSB and 64/256 QAM signal from 75 ohm F-connector
• May choose input digital stream from on-air terrestrial or SMPTE 310M, DVB-ASI or LVDS signal
• MPEG-2 MP@HL, MP@ML compliant Video Decoder supplies Digital and Analog video signal
• Digital video signal compliant with SMPTE 292M (HD-SDI) with embedded 6 channel audio (SMPTE 299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over AES3 XLR connector
• Dolby Prologic compatible stereo audio output on two XLR connectors
• RGB/YPbPr video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL and S-video output available on 480i video mode
• 4 lines by 20 characters LCD display
• PSIP/EIA-608 closed caption compliant
• 2 RU rack mountable frame

Applications:

• Off air 8VSB receiver
• MPEG-2 HD Decoder
• HD-SDI file playback
• Content repurposing

Home

|

Company

|

Ordering Info

|

News

|

Support

|

Careers

|

Contact Us

|

Sitemap

©2012 DVEO.com. All rights reserved.