Systems

Home >> Systems >> 8VSB, NTSC or PAL Television Signal Receiver for Recording, Monitoring, or Repurposing

Broadcast Quality, Frequency Agile, 8VSB HDTV Receiver Demodulator with on board HD MPEG-2 TS Decoder with RF, 8 VSB (ATSC) or TS input and MP @ HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB output. Dolby AC-3 and MPEG Audio decode with XLR connectors. Ideal receiver for Signal monitoring. Includes very high quality HD LCD monitor

Broadcast Quality, Frequency Agile 8VSB HDTV Receiver Demodulator with On Board HD MPEG-2 TS Decoder with RF, 8VSB (ATSC) or DVB ASI TS Input and MP @ HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB Output. Dolby AC-3 and MPEG Audio Decode with Terminal Block Connectors. Ideal Receiver for Signal Repurposing or Monitoring.

Standard Features:

• +75 ohm F-connector
• May choose digital stream from on-air terrestrial and DVB-ASI and SMPTE 310M signal
• Selected digital stream is supplied in DVB-ASI and SMPTE 310M format signal
• MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on two BNC connectors
• Y/Pb/Pr and SDI video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available
• 4 channel audio level display on TFT-LCD monitor
• PSIP/EIA-608, 708 closed caption compliant
• 3U rack mountable frame
• Web-based remote management
  

Applications:

• 8VSB receiver with monitor for OB vans
• HDTV receiver/demodulator
• Signal monitoring
• Standard definition MPEG-2 decoder

Main Status Screen -- Click to enlarge

Input-Output Status Screen -- Click to enlarge

RF Configuration Screen -- Click to enlarge

BNC Out Configuration Screen -- Click to enlarge

Standard Features:

• Accepts 8VSB signal via 75 ohm F-connector
• MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
• NTSC/PAL video output available for preview needs
• 2 lines by 40 characters LCD display
• PSIP/EIA-608 closed caption compliant
• 54-864 Mhz frequency range
• 1 RU rack mountable frame
• Relay based alarm signal
• FCC Class A UL
• Web-based remote management
  
  Also works as an HD decoder with:
• Digital video signal compliant with SMPTE-292M (HD-SDI) with embedded 6 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on two terminal block connectors
• RGB video signal with 1080i/720p/480p/480i video mode
  

Applications:

• Off air 8VSB receiver
• MPEG-2 HD Decoder
• HD-SDI file playback
• Content repurposing

SNMP Reference Manual & MIB (Zip file)