| Cost Effective,
Embedded Linux® Based, Real Time, Hardware Based, MPEG-4 SP,
Broadcast Resolution, Transmission System for delivering High Quality
SDI or Analog Content to Distant Locations Such as Cable Television
Headends via DSL, Wireless, or Other IP Connections. This is an
"Appliance" and Requires No Keyboard or Monitor After
One Time Setup. Will Boot to Desired Mode After Boot Up Upon Power
Failure.
|
Cost Effective,
Continuous, MPEG-2 Transport Stream Player and Recorder with IP
Input and Controlled Rate IP Output with GUI based Menu for Both
Validation and Testing of High Speed Fiber Optic Links. Supports
H.264 Transport Streams. Restriction Free HD content included and
thus it is ideal for traffic generation or stress and load testing
of IP backbones.
|
Cost Effective,
Embedded Linux® Based, Real Time, Hardware Based, MPEG-2 Broadcast
Resolution, Transmission System for delivering High Quality SDI
or Analog Content to Distant Locations Such as Cable Television
Headends via DSL, Wireless, or Other IP Connections. This is an
"Appliance" and Requires No Keyboard or Monitor After
One Time Setup. Will Boot to Desired Mode After Boot Up Upon Power
Failure.
|
| Standard Features:
- MPEG-4 over IP – Sends and receives video simultaneously
- MPEG Encoding up to 9 Mbps
- Pro-MPEG COP 3 Release 2 FEC maintains video transport quality
- Standalone Preconfigured appliances requiring no setup at all
- Sold as pairs for a complete video/IP end-to-end solution
- Provides same image quality at MPEG-4 at 2 Mbps as MPEG-2 at
4 Mbps
- Complete end to end solution - Real time video in and video
out
- All you supply is the T1/E1/DSL or dedicated Internet line with
guaranteed bandwidth, and video
- Designed for 24x7 operation -- setup and forget!
- Optimized for T1 rates if content is uncompressed previously
- For previously compressed material, encode bit rate needs to
be increased by 50%-100%
- Video input and output: SDI, composite, or IP (UDP/RTP)
- Audio input and output is SMPTE 272M-ABC SDI-embedded AES audio,
or analog
- Note: picture artifacts depends on bandwidth available and motion
in pictures
- Standard T1/E/DSL 1 line requirements
Applications:
- Backhaul
- LPR stations
- Ethnic channel importing from other countries
|
Standard
Features:
- MPEG-2 Transport Stream input and output over IP
- Rate Control for IP transmission provided by proprietary technique
- Compatible with HD, H.264, or SD streams
- 120 GB Hard Drive for TS storage
- Bit rate to 800 GBPS
- Supports both SPTS and MPTS
- Features Rich easy-to-use GUI
- Supports 10BT,100BT,Gig/E, in and out
- IP in and out over Gig/E or 100BT
- Includes Automatic TS Analysis Utility with PID and PCR clock
info
- After analysis, user can choose to capture all PIDS or any set
of selected PIDS
- Automatically uses the TS PCR info to calculate proper transport
Stream Rate
- Selectable 188/204 Packet size with auto conversion
- Continuous play or single play modes
- Time Duration, Packets, or xN Repeat settings
- Buffer Overrun or Underrun warnings
- Runs on Windows® XP
- MPEG-2 TS Software viewer monitors output
- Created by TS Industry Leader
- Comes with customized Transport Streams preloaded on request.
Applications:
- Generating test streams for testing Fiber Optic and other High
Speed IP links
- Backup Source for TS over IP
- Snooping or capturing TS over Gig/E IP traffic
- Monitoring or viewing a TS over Gig/E IP streams
- Video over IP server for VOD testing
|
Standard Features:
- MPEG-2 over IP – Sends and receives video simultaneously
- MPEG Encoding up to 9 Mbps
- Pro-MPEG COP 3 Release 2 FEC maintains video transport quality
- Standalone Preconfigured appliances requiring no setup at all
- Sold as pairs for a complete video/IP end-to-end solution
- Provides same image quality at MPEG-4 at 2 Mbps as MPEG-2 at
4 Mbps
- Complete end to end solution - Real time video in and video
out
- All you supply is the T1/E1/DSL or dedicated Internet line with
guaranteed bandwidth, and video
- Designed for 24x7 operation -- setup and forget!
- Optimized for T1 rates if content is uncompressed previously
- For previously compressed material, encode bit rate needs to
be increased by 50%-100%
- Video input and output: SDI, composite, or IP (UDP/RTP)
- Audio input and output is SMPTE 272M-ABC SDI-embedded AES audio,
or analog
- Note: picture artifacts depends on bandwidth available and motion
in pictures
- Standard T1/E/DSL 1 line requirements
Applications:
- Backhaul
- LPR stations
- Ethnic channel importing from other countries
|
Chinese
English
Korean 
Japanese 
French
MPEG-2, MPEG-4, H.264 (Video over IP): IP TV
