MPEG-2, H.264, JPEG-2000: SD (Standard Definition) MPEG-2 Decoders

Broadcast Quality Frequency Agile High Definition 8/16 VSB Receiver Demodulator with MPEG-2 HD/SD Decoder (2.5-45 Mbps). Decodes DVB-ASI or SMPTE 310M and Demodulates 8VSB RF and Converts it to SDI, HD-SDI, RGB, YPrPb, or Composite Output. Transport Streams Play Out in HD or SD Format. Optional Secondary SD Decoder with Composite Output Only. Dolby AC-3 and MPEG Audio Decode with XLR Connectors. Cost Effective MPEG-2 Decoder/Receiver. Additional Features include SNMP Management.

A Professional Multi Standard, Remotely Manageable, SD and HD, 4:2:0, MPEG-2 and 4 and H.264 Decoder With DVB-S+S2, IP (with Pro-MPEG FEC), or ASI Input. Decodes Both H.264 and MPEG-2 industry standard Broadcast HD and SD Video feeds to SMPTE 292 (HD-SDI), SMPTE 259M, or YPrPb. Menu options for PCM or Compressed Audio with Compressed choices between AC-3 or MPEG-1 layer II. Management tool stores data on multiple transponders in profiles section. Supplies crystal clear future proof multistandard digital video and digital and analog audio for most formats used to distribute content by Broadcast Professionals in all parts of the world. Supports BISS and Other CA.

Professional, 1 RU, DVB-S Receiver with Integrated 2 Channel SD MPEG-2 Decoder. Supports DVB-S, and ASI In and CVBS, SDI, Out. Supports MPEG-1 Layer II Audio. Includes Web-based Management. Previously used but in great shape. Comes with 1 year DVEO warranty. Eval units available...

Standard Features:

• Input: 8/16 VSB, DVB-ASI, SMPTE 310M
• Output: ASI, SMPTE 310M, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL)
• Decodes and displays closed captioning (EIA 608 or EIA 708)
• Receives 8VSB signal via 75 ohm F-connector
• Choose digital stream from on-air terrestrial (8VSB) or DVB-ASI or SMPTE-310M signal
• MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
• Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
• RGB video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available
• 2 lines by 40 characters LCD display
• Down converts HD input to SD out
• Front panel controls for fast setup
• Firmware upgradeable via internet or USB
• SNMP (10/100 Base T Ethernet) management
• Easy-to-use Web-based GUI
• PSIP display – PAT, PMT, MGT, VCT, EIT, STT
• Optional second RF input port
  

Applications:

• Off air 8VSB receiver
• MPEG-2 HD or SD Decoder
• HD-SDI file playback
• Content repurposing

Standard Features:

• Input: DVB-S+S2, IP, DVB-ASI
• Optional 2nd DVB-S+S2 RF input
• Supports Pro-MPEG FEC
• Includes CAM module and support for BISS
• Output: HD-SDI, SDI, DVB-ASI, YPrPb, RGB, composite, MPEG or AC-3 audio
• Signal from 75 ohm BNC connector
• May Choose Digital Stream from satellite or DVB-ASI or SMPTE-310M or IP signal
• Selected digital stream is supplied in DVB-ASI and SMPTE-310M format signal
• H.264 (MPEG-4)/MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-259M or SMPTE-292M (SDI) with embedded 8 channel audio (SMPTE-299M)
• Dolby Digital AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on one XLR connector and one D-Sub 9P connector
• RGB video signal with 1080i/720p/576p/ 576i (480i) video mode
• 2 Lines by 40 characters LCD display
• PSIP/EIA-608, 708 closed caption compliant
• Down converts HD input to SD out
• 1 RU rack mountable frame
• Firmware upgradeable via Internet or USB
• USB 2.0 Support
• SNMP (10/100 Ethernet) management support

Applications:

• Off air satellite receiver
• MPEG-2/4/H.264 HD Decoder
• HD-SDI file playback
• Content repurposing

Standard Features:

• 2 composite video outputs or 2 SDI outputs via 2 separate decoders

• Embedded VBI and up to 4 stereo channels in SDI
  

• Decoding 4:2:0 PP@ML (1.5–50 Mbps)
  

• 2 Active out of 4 analog-audio-stereo balanced interfaces
  

• 2 Active out of 4 AES/EBU-SPDIF audio unbalanced interfaces
  

• SNMP management (10/100 Base-T)
  

• Web-based management (10/100 Base-T)
  

• RS-232 low speed data
  

• GPI
  

• Front panel monitoring connector

OUTPUTS Include:

• IP
• SDI Output
  
• CVBS
  
• AES/EBU
  
• S-Video

Note: We are not affiliated with Harmonic.

Professional Grade, 19 Inch Rack Mountable, Cost Effective and Versatile Standard Definition Integrated Receiver Decoder with DVB-S (QPSK), DVB-S2, and DVB-ASI Input. Features DVB-ASI, SDI, YPbPr, and CVBS Outputs. Decodes Standard Definition MPEG-2 Streams at 1 to 12 Mbps. Full Setup and Configuration via Web-based Management or LCD Front Panel. Supports PAL, NTSC, and SECAM.

Real Time, Hardware Based, 1 RU, Local or Remotely Manageable Multi Resolution, SD and HD, 4:2:0, H.264 and MPEG-2 Decoder with IP, DVB-S/S2, or Looped ASI Input. Set Up via LCD Front Panel or via Browser. Output is SDI (SMPTE 259M), HD-SDI (SMPTE 292M), ASI, Component, HDMI, or Composite. Audio Output Includes Embedded or MPEG-1 Layer II on SDI Ports or Balanced Audio with Dual XLR Connectors. Supports Dual CAM Modules.

Standard Features:

• Inputs:
  • DVB-S (QPSK)
  • DVB-S2
  • DVB-ASI
• Outputs: 
  • Two mirrored DVB-ASI outputs
  • Two mirrored SDI outputs
  • YPbPr
  • CVBS (Composite Video)
• Two Common Interface (CI) slots for descrambling most common CA systems
• Compatible with multi-decrypt CI modules
• Automatic PMT updates after program filtering
• VBI teletext, EBU subtitle and DVB subtitle processing
• Balance audio (XLR) output
• Management via front panel or Ethernet port
• Compatible with all SMiT brand CAM cards
• Software upgradeable via RS232 port or NMS
• Supports PAL, NTSC, and SECAM
• DVB-T version also available
  
  

Applications:

• Satellite receiver
• MPEG-2 Transport Stream Decoder
• Signal monitoring
• Content repurposing
• General head-end decoder

Standard Features:

• Inputs:
  • IP (100/1000 M), DVB-ASI with loopthrough, or DVB-S or DVB-S2 with loopthrough
• Outputs:
  • IP (UDP, RTP), HD-SDI, SDI, HDMI, Two DVB-ASI outputs, Two mirrored DVB-ASI outputs, YPrPb, or Two Composite outputs – one BNC, one RCA
• Audio Outputs: Embedded AAC, MPEG-1 Layer II, YPbPr, Composite, Balanced XLR, Dolby Digital® AC-3 Passthrough
• 100/1000 M IP input and output
• Optional DS3 in/out interface is compatible with Barco and Huawei protocols
• Built-in re-multiplexer
• BISS 1 or BISS E decryption
• Dynamic PMT detection and automatic update
• VBI teletext, EBU/DVB subtitle support
• WSS support
• Closed Caption support
• Unicast and Multicast support
• 2 CI slots support 4 service CAM modules each
• Compatible with: Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viaccess and more
• Supports PAL, NTSC, and SECAM
• LCD front panel controls plus web-based management

Applications:

• Off air satellite receiver
• MPEG-2/4/H.264 HD Decoder
• Transport Stream Decoder
• HD-SDI file playback
• Content repurposing
• Signal monitoring
• IP to ASI and ASI to IP converter

Little known facts about Iridium: The element

11409 West Bernardo Court
San Diego, CA 92127
US Phone: (858) 613-1818 Fax: (858) 613-1815