Broadcast Quality, Full Featured, Industry Compliant, Remotely Manageable, 1 RU, Standard and High Definition Fujitsu® Chip Based H.264 AVC Part 10 Encoder with HDMI, Component, SDI, HD-SDI, and CVBS Inputs and Both ASI and IP Outputs. Audio Support Includes Analog in, or Embedded Audio. Audio Output is AAC, MPEG-1 Layer II, or Dolby Digital® AC-3 Passthrough. Tested to Work with Most Decoders and with Wowza™ and Adobe® Flash® Servers. Features Pro-MPEG FEC. Features VBR or CBR (Constant Bit Rate) Output. CBR Setup Enables Great IP Video Delivery with our Virenza-S+S2™ IP H.264 Decoder. Unit has been Tested to Work with Harmonic, Tandberg, Cisco, and Sencore Decoders.

A Professional Multi Standard, Remotely Manageable, SD and HD, 4:2:0, MPEG-2 and 4 and H.264 Decoder With DVB-S+S2, IP (with Pro-MPEG FEC), or ASI Input. Decodes Both H.264 and MPEG-2 industry standard Broadcast HD and SD Video feeds to SMPTE 292 (HD-SDI), SMPTE 259M, or YPrPb. Menu options for PCM or Compressed Audio with Compressed choices between AC-3 or MPEG-1 layer II. Management tool stores data on multiple transponders in profiles section. Supplies crystal clear future proof multistandard digital video and digital and analog audio for most formats used to distribute content by Broadcast Professionals in all parts of the world. Supports BISS and Other CA.

Standard Features:

• Input: HDMI, SDI/HD-SDI, YPbPr, or CVBS
• Output: Two identical ASI outputs and 1 GigE IP output (Simultaneous)
• Supports both H.264 HD and SD encoding with auto detection
• Supports IP unicast and multicast
• Supports Pro-MPEG Code of Practice #3 (CoP3) Forward Error Correction (FEC)
• Supports SI (SDT) and edit function
• Real-time HDTV video & audio compressions
• Fully compatible with H.264/MPEG-4 AVC encoding
• Supports H.264 High Profile @ Level 4.0 (HP@L4)
• Supports 1080i and p, 720p, and 480i
• Supports HDTV input formats SMPTE-274M/ SMPTE-296M-2001, ITU-R BT.656
• Supports IP output UDP or RTP protocol as well as ASI output
• Supports VBR or CBR -- Unusual Feature
• Audio Input: Analog, SDI Embedded, or HDMI Embedded
• Audio Output: MPEG-1 Layer II, AAC, or Dolby Digital® AC-3 passthrough
• Configure and operate via front panel controls or remote management
• HDCP passthrough
• MPEG LA licensed
• Boots up in approximately 35 seconds
• Matching decoder available (Virenza™)
• Now shipping with 1080p support

Applications:

• Backhaul applications
• Send HD or SD video via private IP networks
• Electronic News Gathering (ENG)

click to enlarge

Standard Features:

• Input: DVB-S+S2, IP, DVB-ASI
• Optional 2nd DVB-S+S2 RF input
• Supports Pro-MPEG FEC
• Includes CAM module and support for BISS
• Output: HD-SDI, SDI, DVB-ASI, YPrPb, RGB, composite, MPEG or AC-3 audio
• Signal from 75 ohm BNC connector
• May Choose Digital Stream from satellite or DVB-ASI or SMPTE-310M or IP signal
• Selected digital stream is supplied in DVB-ASI and SMPTE-310M format signal
• Dual MPEG-2 (HD/SD) decoding, single MPEG-4/ H.264 decoding (single audio decoding only)
• H.264 (MPEG-4)/MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-259M or SMPTE-292M (SDI) with embedded 8 channel audio (SMPTE-299M)
• Dolby Digital® AC-3, HE-AAC, and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on one XLR connector and one D-Sub 9P connector
• RGB video signal with 1080i/720p/576p/ 576i (480i) video mode
• 2 Lines by 40 characters LCD display
• PSIP/EIA-608, 708 closed caption compliant
• Down converts HD input to SD out
• 1 RU rack mountable frame
• Firmware upgradeable via Internet or USB
• USB 2.0 Support
• SNMP (10/100 Ethernet) management support

Applications:

• Off air satellite receiver
• MPEG-2/4/H.264 HD Decoder
• HD-SDI file playback
• Content repurposing