|
Broadcast Quality High Definition MPEG-2
HD Decoder ( 14-45 Mbps) with DVB ASI input or 8VSB RF input
and ATSC, SPI, SDI, HD SDI, Y/C, or Y Pr Pb output. Dolby
AC-3 and MPEG Audio decode with XLR connectors. Ideal cost
effective High Definition MPEG-2 decoder.
IN:
|
8VSB, QAM 64, QAM 256, DVB ASI
, DVB SPI |
| OUT: |
ASI, SPI, SDI or HD- SDI, Y/C,
or Y Pr Pb |
|
Broadcast Quality, Frequency Agile,
8VSB HDTV Receiver Demodulator with on board HD MPEG-2 TS
Decoder with RF, 8VSB (ATSC) or TS input and MP@HL ASI,
SMPTE 310M, SDI, HD-SDI, Composite, or RGB output. Dolby
AC-3 and MPEG Audio decode with XLR connectors. Ideal receiver
for Signal monitoring. Includes very high quality HD LCD
monitor
|
Broadcast
Quality, Frequency Agile 8VSB HDTV Receiver Demodulator
with DVB ASI Outputs. Ideal Receiver to Enable Television
Signals to be Inserted into Digital Cable Systems.
IN:
|
8VSB, DVB ASI |
| OUT: |
ASI, SDI or HD-SDI, Y/C, or Y
Pr Pb |
|
Standard Features:
- Receives 8/16 VSB and 64/256 QAM signal from 75 ohm
F-connector
- May choose input digital stream from on-air terrestrial,
or SMPTE 310M, DVB-ASI and LVDS signal
- output signal is available in SMPTE-310M, DVB-ASI and
LVDS or several uncompressed formats
- MPEG-2 MP@HL compliant video decoder supplies digital
and analog video signal
- Digital video signal compliant with SMPTE-292M (HD SDI)
with embedded 6 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- AC-3 or PCM stereo audio selectable over AES3 XLR connector
- Dolby Pro Logic compatible stereo audio on two XLR connectors
- RGB/YPbPr video signal with 1080i/720p/480p/480i video
mode
- NTSC/PAL and S-video output available on 480i video
mode
- 4 lines by 20 characters fluorescent display
- PSIP/EIA-608 Closed Caption compliant
- 2U rack mountable frame
|
Standard
Features:
- +75 ohm F-connector
- May choose digital stream from on-air terrestrial and
DVB-ASI and SMPTE 310M signal
- Selected digital stream is supplied in DVB-ASI and SMPTE
310M format signal
- MPEG-2 MP@HL compliant video decoder supplies digital
and analog video signal
- Digital video signal compliant with SMPTE-259M/SMPTE-292M
(SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable
over BNC connector
- Dolby Prologic compatible stereo audio output on two
BNC connectors
- Y/Pb/Pr and SDI video signal with 1080i/720p/480p/480i
video mode
- NTSC/PAL video output available
- 4 channel audio level display on TFT-LCD monitor
- PSIP/EIA-608, 708 closed caption compliant
- 3U rack mountable frame
|
Standard
Features:
- Accepts 8VSB signal via 75 ohm F-connector
- MPEG-2 MP@HL compliant video decoder supplies either
digital or analog video outputs
- NTSC/PAL video output available for preview needs
- 2 lines by 40 characters LCD display
- PSIP/EIA-608 closed caption compliant
- 54-864 Mhz frequency range
- 1U rack mountable frame
- Relay based alarm signal
- FCC Class A UL
Also works as an HD decoder with:
- Digital video signal compliant with SMPTE-292M (HD-SDI)
with embedded 6 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable
over BNC connector
- Dolby Prologic compatible stereo audio output on two
terminal block connectors
- RGB video signal with 1080i/720p/480p/480i video mode
|