Broadcast Quality Frequency Agile High Definition 8/16 VSB Receiver Demodulator with MPEG-2 HD/SD Decoder (2.5-45 Mbps). Decodes DVB-ASI or SMPTE 310M and Demodulates 8VSB RF and Converts it to SDI, HD-SDI, RGB, YPrPb, or Composite Output. Transport Streams Play Out in HD or SD Format. Optional Secondary SD Decoder with Composite Output Only. Dolby AC-3 and MPEG Audio Decode with XLR Connectors. Cost Effective MPEG-2 Decoder/Receiver. Additional Features include SNMP Management.
IN:
|
|
8/16 VSB, DVB-ASI, SMPTE 310M |
OUT: |
|
ASI, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL) |
|
Broadcast Quality, Frequency Agile, 8VSB HDTV Receiver Demodulator with On Board HD or SD MPEG-2 TS Decoder with RF (8VSB ATSC) or TS input and MP@HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB Output. Dolby AC-3 and MPEG Audio Decoder with XLR Connectors. Ideal Receiver for Signal Monitoring in Small Spaces Such as ENG Trucks. Includes Very High Quality HD LCD Monitor. Features Many On Screen Diagnostics Displayed as Overlay.
|
Professional Grade, Rackmounted, Multichannel (8) Embedded Linux® Based 8VSB to IP Gateway that Integrates Eight of Our PC Bus Based 8VSB RF Receivers and De-encapsulates and Routes Selected or All Transport Streams to Any MAC Address via IP – UDP, RTP, HTTP, or FTP. Can Work as a Low Cost “Front End” in Small VOD Implementations. Typically the Desired Streams are Streamed in Real Time via IP Multicast or Unicast Streams to IP Set Top Boxes (STB's) Such as Amino, or Designated VLC or MPlayer Equipped PC clients for Viewing. This product will allow you to monitor your ATSC Broadcast and those of your neighboring stations on any PC... |
Standard
Features:
- Input: 8/16 VSB, DVB-ASI, SMPTE 310M
- Output: ASI, SMPTE 310M, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL)
- Decodes and displays closed captioning (EIA 608 or EIA 708)
- Receives 8VSB signal via 75 ohm F-connector
- Choose digital stream from on-air terrestrial (8VSB) or DVB-ASI or SMPTE-310M signal
- MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
- Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
- Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
- RGB video signal with 1080i/720p/480p/480i video mode
- NTSC/PAL video output available
- 2 lines by 40 characters LCD display
- Down converts HD input to SD out
- Front panel controls for fast setup
- Firmware upgradeable via internet or USB
- SNMP (10/100 Base T Ethernet) management
- Easy-to-use Web-based GUI
- PSIP display – PAT, PMT, MGT, VCT, EIT, STT
- Optional second RF input port
Applications:
- Off air 8VSB receiver
- MPEG-2 HD or SD Decoder
- HD-SDI file playback
- Content repurposing
|
Standard
Features:
- RF input Signal via 75 ohm F-connector
- May choose digital stream from on-air terrestrial and DVB-ASI and SMPTE 310M signal
- On-screen transport stream diagnostics presented as overlay
- Selected digital stream is supplied in DVB-ASI and SMPTE 310M format signal
- MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
- Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
- Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
- Y/Pb/Pr and SDI video signal with 1080i/720p/480p/480i video mode
- NTSC/PAL video output available
- 4 channel audio level display on TFT-LCD monitor
- PSIP/EIA-608, 708 closed caption compliant
- 3 RU rack mountable frame
- Web-based remote management
- Optional systems:
- TAV900A with DVB-S
- TAV900A with DVB-T
- TAV900A with DVB-T2
Applications:
- 8VSB receiver with monitor for OB vans
- HDTV receiver/demodulator
- Signal monitoring
- Standard definition MPEG-2 decoder
Main Status Screen -- Click to enlarge
Input-Output Status Screen -- Click to enlarge
RF Configuration Screen -- Click to enlarge
BNC Out Configuration Screen -- Click to enlarge
|
Standard
Features:
- Encapsulates transport streams into IP packets
- Simultaneously receives transport streams from one to eight 8VSB RF Sources
- MPEG-2 input and output or H.264 input and output
- 8VSB – terrestrial digital – input
- IP Output: IP – UDP, RTP, FTP
- Supports SD and HD formats
- Capable of near real time FTP output of segmented TS streams with I-Frame boundaries
- PID filtering
- 400 Mbps IP raw output capability
- Transmits PAT, PMT, and PCR information
- Receives and transmits at the same time
- Remote configuration management via Web Browser and Secure Shell (SSH)
- Optional support for encrypted streams (CAM modules)
- Supports NTSC or PAL
- Based on embedded Linux®
- For system with up to 15 Mbps IP transcoded H.264 output capability, see MPEG Gearbox™
- Available with optional DC Power Supply
Applications:
- IPTV Unicasting, Multicasting, Streaming
- Telco TV
- Front-end to VOD
- Streaming to designated VideoLAN VLC, Mplayer, or Windows Media Player clients
|
Chinese
English
Spanish
Korean
Japanese
French
